Manufacturer of premium high performance aluminum and stainless steel boat propellers
tl tr

PROP TEST RESULTS



100% approval rating by NAFC Field testers!
Turning Point was recently put “to the test” by the North American Fishing Club Field testers. They tested Turning Point's aluminum propellers versus their own propellers.

The North American Fishing Club (www.fishingclub.com) conducted a field test of Turning Point's Hustler aluminum boat propellers. The field testers recorded their own performance test results of the Turning Point Hustler aluminum propellers versus their current propeller.

The results were unanimous! Turning Point received a 100% approval rating. Every boater that tested our propellers experienced a performance increase over their current propeller!

Please review the data below submitted by the NAFC field testers.

Handling Score Key:
(Best) 5
Prop holds throughout the turns.
4
Ventilate after apex of the turns.
(Acceptable) 3
Ventilates at apex of the turns.
2
Light ventilation throughout the turns.
1
Excess ventilation through out the turns and after the turns.
0 Blow out, can't turn at all. Need to back off the throttle.
All trademarks are the property of their respective owners


Boat:
Bayliner 16'
Motor:
Force® 70
Propeller Brand Top Speed WOT RPM Handling
Hustler® 10-1/8 x 15
40
5500
5
Mercury® 10-1/8 x 15
30
5400
3
"Wow! It seems like a new boat! The old prop pushed the boat through the water like it was mud. I never could pull a skier. The new (Turning Point) prop pulled two skiers like nothing."
B. Bessent. LaPine, OR

Boat:
Starcraft® 16
Motor:
Mercury® 60 EFI
Engine WOT Range:
5500-6000
Propeller Brand Top Speed WOT RPM Handling
Hustler® 10-3/8 x 14
32.25
5175
5
Mercury® 10-1/4 x 14
32
5250
5
"The hole shot seems much better than the factory prop. Holds well in turns and is easy to install. Appears very sturdy & well designed with bigger than factory blades. I would choose this prop over the factory prop. I will leave this prop on my boat and use the factory prop as a spare."
L. Miller. Youngstown, OH

Boat:
Smokercraft® 17
Motor:
Johnson 115 2 stroke
Engine WOT Range:
5252-5750
Propeller Brand Top Speed WOT RPM Handling
Hustler® 13-1/4 x 19
34.2
n/a
5
Johnson® 14 x 19
29.3
n/a
3
"I was very impressed with the torque I felt with the Turning Point prop. The increase in power and smoothness was very noticeable. Easy installation. Great in turns, a lot better than the stock prop."
R. Hanson. Amery, WI

Boat:
Tracker® 186
Motor:
Mercury® 115 4 stroke
Engine WOT Range:
5000-6000
Propeller Brand Top Speed WOT RPM Handling
Hustler® 13-1/4 x 21
46
5900
5
Merc Vengence® (ss) 13x16
45.5
5550
5
D. Reynolds. Auburn, NY

Boat:
Lund 182
Motor:
Yamaha 115
Engine WOT Range:
5000-6000
Propeller Brand Top Speed WOT RPM Handling
Hustler® 13-1/4 x 17
47
5800
4
Yamaha® 13 x 19
46
5950
3
P. LeBlanc. Newport, NH

Boat:
G3
Motor:
Yamaha® 90
Engine WOT Range:
4500-5500
Propeller Brand Top Speed WOT RPM Handling
Hustler® 13-1/4 x 17
33.5
5625
5
Yamaha® 13-1/4 x 17
32
5525
5
"The holding with the Turning Point prop is awesome!"
P. Bologna. Foster City, CA

Boat:
Searay® 17
Motor:
Mercruiser® 135
Engine WOT Range:
4400-4800
Propeller Brand Top Speed WOT RPM Handling
Hustler® 14-1/4 x 17
44
4300
4
Mercury® 14 x 19
37
3500
3
"Having worked in the tool and dye industry for the past 25 years, I must say that this prop is one of the finest quality."
M. Gelfond. Chicago, IL

Boat:
Lund® 185
Motor:
Honda 90
Engine WOT Range:
5000-6000
Propeller Brand Top Speed WOT RPM Handling
Hustler® 13-1/4 x 17 aluminum
29
4850
5
Powertech® 12 x 17 stainless
31.5
5200
5
"The Turning Point prop felt solid throughout the performance test. I'd say it compares favorably with my stainless steel prop. I did experience a bit of speed loss, however no speed loss with an additional passenger. I did get to plane faster with the test (Hustler) prop."
A. Rognervo. Racine, WI

Boat:
Smokercraft 16
Motor:
Mercury 40
Engine WOT Range:
4500-5500
Propeller Brand Top Speed WOT RPM Handling
Hustler® 10-7/8 x 11
34.5
4650
5
Michigan Wheel® 9 x 10
30
4800
5
J. Kampenga. Burbank, IL

Boat:
Alumnacraft® 163
Motor:
Mercury® 60
Engine WOT Range:
5000-5500
Propeller Brand Top Speed WOT RPM Handling
Hustler® 10-3/8 x 14
56
n/a
5
Mercury® 10-3/8 x 16
53
n/a
5
"Turning Point test prop: planed the boat quicker with a faster hole shot. This is a very good prop."
D. Scheunemann. Marshfield, WI

Boat:
Lund 175
Motor:
Yamaha 115
Engine WOT Range:
5000-6000
Propeller Brand Top Speed WOT RPM Handling
Hustler® 13-1/4 x 19
43.5
5625
5
Yamaha® 13 x 17
38.25
5900
2
"The boat feels like a bullet with the Turning Point prop. It's a higher, drier ride."
J. Hedstrom. Bemidji, MN
Boat:
Sylvan 16
Motor:
Yamaha 55
Engine WOT Range:
4500-5500
Propeller Brand Top Speed WOT RPM Handling
Hustler 10-1/2 x 13
28
4900
n/a
Cabelas stainless steel 10-1/2 x 13
28
4900
n/a
"The Turning Point prop put the boat on plane faster than my stainless steel prop. Top speed/rpm was identical, but I got there faster with the Turning Point prop! I definetely recommend this prop."
N. Treida. Flower Mound, TX

Boat:
Lund Pro Sport 17
Motor:
Mercury 115
Engine WOT Range:
4750-5250
Propeller Brand Top Speed WOT RPM Handling
Hustler 13-1/4 x 19
45
5200
5
Mercury 13-1/4 x 19
40
4800
5
I was extremely satisfied with the performance of the prop. My standard Merc prop will now become my backup prop. I have already told 3 boaters of these results, they were also impressed. I also made a third run with another person in the boat and the boat still ran 45 mph @ 5200 rpm's.
D. Tomlinson. Austin, MN

   
tl tr

boat propeller finder
to find a high performance
boat propeller:

1.
2.
3.

*Use the selection boxes
located on the right.
Propeller Wizard v2.0
engine arrow boat arrow recommendation
Engine / Drive Selection

Select the Engine Manufacturer

Select the HP or Sterndrive
Select the Model
Select the Year
Boat Selection

Choose your boats category
Length (feet)
Boat Year
Boat Manufacturer*
Boat Model*
*click here if you can not find your boat
Enter Boat Information

*Choose your boats category

*Boat Length (feet)

*Boat Beam (feet)

*Dry / Net Weight of your boat(lbs)



Recommendation

*Average Number of People

*Average Amount of Fuel
gallons
Extra Weight
lbs (extra weight calculator - click here)
# of Engines

Altitude (feet) terms of use - please read
   
tl tr
SEARCH by OEM or aftermarket part number:
   
tl tr
Turning Point Propellers, Inc.
Propeller Models
   
tl tr
Propellers that Runfaster, Pull Harder, Handle Better
Achieve maximum top end speed with Turning Point's High-Performance blade geometry. Our blade designs incorporate industry leading high rake patterns, fine tuned pitch progression, aggressive cupping, and sharp trailing edges. Increase horsepower, acceleration, and top end speed with our maximum exhaust flow hub kit systems.
Higher RPM hole shots reduces planning times over OEM and other aftermarket propellers. Turning Point's High Performance stainless & aluminum propellers are also vented to further increase performance. The perfect RPM can be found with Turning Point's wide range of high performance pitch options. Take time to accurately tune in the optimal pitch & RPM for any application with the Prop Wizard.

Fuel efficient blade designs allow for maximum performance while maintaining low fuel consumption. Turning Point's efficient-slip technology allows for faster cruising speeds at lower RPM - Saves fuel, saves money!
   
tl tr
   
tl tr